Davika QD Mount for Aimpoint Micro
- Regular price
- €219,90
- Sale price
- €219,90
- Regular price
Davika RDM-01-QD Mount for Aimpoint Micro
The Davika RDM-01-QD is a high-performance quick-detach riser mount designed for Aimpoint Micro series opticsand other red dot sights using the same mounting footprint. It provides an optical axis height of 57 mm (2.25”), supporting a more natural head-up shooting posture when using night vision devices, gas masks, or tactical headsets.
The mount is designed to remain compatible with backup iron sights while supporting the integration of a red dot optic, laser aiming device, and optical magnifier into a single rigid aiming platform. Its adjustable quick-detach system enables rapid, tool-less removal and installation while maintaining repeatable return-to-zero performance.
Key Features
Optic Compatibility
- Designed for Aimpoint Micro footprint optics
- Compatible with:
- Aimpoint T-1 / T-2
- Aimpoint H-1 / H-2
- Aimpoint CompM5
- SIG Sauer Romeo4 / Romeo5 / Romeo-MSR
- Holosun 403, 503, 515, and 530 series
- Other optics using the Aimpoint Micro footprint
- Optical axis height of 57 mm (2.25”)
- Supports use with night vision devices, gas masks, and tactical headsets
- Magnifiers may not align with Aimpoint Duty RDS or similar optics with a higher optical axis than the T-2
Integrated Tactical Hub
- Front-facing SMAI-B interface for thermal clip-on or laser devices
- Rear Dovetail QD interface for compatible magnifiers
- Designed to support optical alignment and zero retention between mounted devices
- Enables integration of multiple aiming components into one platform
Backup Sight Compatibility
- Open center channel preserves the line of sight to backup iron sights
- Allows factory mechanical sights to remain usable without removing the optic or mount
- Integrated rear aiming notches at 34 mm and 36 mm
- Built-in backup rear sight functionality for use with the rifle’s front sight
Precision Mounting Geometry
- Optimized for repeatable positioning on Picatinny rails
- Designed to minimize movement under recoil
- Precision-milled longitudinal center recess
- Two narrow parallel contact lines help reduce the effect of rail surface imperfections
- Center-cut recoil lug distributes clamping force across two bearing surfaces
- Designed to reduce rail tolerance issues and prevent shifting under heavy recoil
Quick-Detach System
- Eccentric quick-detach mechanism
- Adjustable clamping tension
- Rapid tool-less mounting and removal
- Ergonomic release lever with dedicated safety locking button
- Helps prevent accidental release during operation
- Designed for repeatable return-to-zero after repeated removal and reinstallation
Construction & Finish
- Manufactured from 7075-T6 aircraft-grade aluminum
- MIL-A-8625 Type III hardcoat anodized finish
- Drainage channels support uniform anodizing of internal areas and threads
- Stainless-steel screws with dark anti-reflective coating
- Developed for demanding military and field applications
Technical Specifications
Model: Davika RDM-01-QD
Type: Quick-detach riser mount
Optic Compatibility: Aimpoint Micro footprint
Optical Axis Height: 57 mm (2.25”)
Mounting Interface: Picatinny rail
Front Interface: SMAI-B
Rear Interface: Dovetail QD
Integrated Backup Notches: 34 mm / 36 mm
Material: 7075-T6 aircraft-grade aluminum
Finish: MIL-A-8625 Type III hardcoat anodized
Fasteners: Stainless steel with dark anti-reflective coating
Mounting System: Adjustable eccentric QD mechanism with safety lock
Care
Gear Care (Read This Before You Wreck It)
Always follow the manufacturer’s care instructions first. That’s the rule.
In general:
Soft goods (clothing, slings, pouches, etc.) are usually machine-washable at 30°C and air dry only — unless the label or product page says otherwise. No tumble dryer, no bleach, no “it’ll probably be fine.”
Hard goods (plates, helmets, tools, lights, etc.) should not be thrown in a washer. Wipe them down with water or a mild cleaner and let them dry naturally. No solvents, no high heat, no dishwasher experiments.
If you use cleaning methods that are not recommended by the manufacturer and something fails because of that, it’s not covered by warranty.
Treat your kit like it’s going back out tomorrow.
Care
Gear Care (Read This Before You Wreck It)
Always follow the manufacturer’s care instructions first. That’s the rule.
In general:
Soft goods (clothing, slings, pouches, etc.) are usually machine-washable at 30°C and air dry only — unless the label or product page says otherwise. No tumble dryer, no bleach, no “it’ll probably be fine.”
Hard goods (plates, helmets, tools, lights, etc.) should not be thrown in a washer. Wipe them down with water or a mild cleaner and let them dry naturally. No solvents, no high heat, no dishwasher experiments.
If you use cleaning methods that are not recommended by the manufacturer and something fails because of that, it’s not covered by warranty.
Treat your kit like it’s going back out tomorrow.
Shipping & Returns
We move fast.
For in-stock items, handling time is 0–1 business days and we hand your order to the carrier right away. Shipping speed and price depend on what you pick at checkout (Posti for standard/economy in Finland & EU, FedEx for faster domestic, EU/EEA, and international delivery).
If something is shown as out of stock but still purchasable, that means it’s on back-order / special-order. Estimated dispatch for those items is usually 5–30 days. High-end products like night vision devices and thermal optics are most often “made to order,” meaning we source them individually per customer request.
If your cart has both in-stock gear and made-to-order gear, we may ship what’s ready first so you don’t have to wait.
You’ll get a tracking code as soon as your parcel is handed to Posti or FedEx.
Shipping & Returns
We move fast.
For in-stock items, handling time is 0–1 business days and we hand your order to the carrier right away. Shipping speed and price depend on what you pick at checkout (Posti for standard/economy in Finland & EU, FedEx for faster domestic, EU/EEA, and international delivery).
If something is shown as out of stock but still purchasable, that means it’s on back-order / special-order. Estimated dispatch for those items is usually 5–30 days. High-end products like night vision devices and thermal optics are most often “made to order,” meaning we source them individually per customer request.
If your cart has both in-stock gear and made-to-order gear, we may ship what’s ready first so you don’t have to wait.
You’ll get a tracking code as soon as your parcel is handed to Posti or FedEx.
For full details (carriers, international taxes, delivery issues, etc.), read our complete Shipping Policy.
