Davika QD Mount 38H for iRay RH25 / PFN640+
- Regular price
- €149,90
- Sale price
- €149,90
- Regular price
Davika TSM-01-QD-38H Mount for iRay RH25 / PFN640+
The Davika TSM-01-QD-38H is a dedicated quick-detach mount for the InfiRay (iRay) Rico Micro RH25 and PFN640+ V2 thermal devices. With a 38 mm (1.5”) optical axis height, it is designed to integrate thermal optics with a range of sighting systems while maintaining consistent positioning and alignment.
The mount is primarily designed for using the thermal device as a clip-on in front of an LPVO, without requiring additional risers or adapters. When paired with a 19 mm riser such as the PR-02, it can also be configured as a thermal clip-on in front of a red dot sight. The thermal device can additionally be used as a standalone primary thermal sight.
Key Features
Thermal Device Compatibility
- Designed for InfiRay (iRay) Rico Micro RH25 and PFN640+ V2
- 38 mm (1.5”) optical axis height
- Compatible with thermal clip-on configurations
- Can be used as a standalone primary thermal sight
- Designed to maintain zero when transitioning between configurations
RDM Ecosystem Integration
- Integrates with the DAVIKA RDM ecosystem
- Supports red dot, magnifier, and thermal configurations
- Can be paired with the PR-02 Picatinny riser for red dot applications
- Supports LPVO-mounted thermal clip-on configurations
- Thermal device can be redeployed as a standalone primary sight
Precision Mounting
- Precision-milled longitudinal recess contacts the Picatinny rail along two narrow parallel lines
- Helps minimize the influence of rail surface imperfections
- Center-cut recoil lug distributes clamping force across two bearing surfaces
- Geometry is designed to address rail tolerance variations and prevent shifting under recoil
- Designed for repeatable positioning on the Picatinny rail
Quick-Detach System
- Eccentric QD mechanism with adjustable clamping tension
- Tool-free mounting and removal
- Ergonomic lever with dedicated safety locking button
- Prevents accidental release during use
- Designed for repeatable return-to-zero performance after removal and reinstallation
Optical Alignment
- 38 mm (1.5”) optical axis height
- Designed to align thermal and other sighting components on a common optical axis
- Suitable for integration with different sighting configurations
Construction & Finish
- Manufactured from 7075-T6 aluminum
- MIL-A-8625 Type III Hardcoat Anodized finish
- Stainless-steel fasteners with dark anti-reflective coating
- Drainage channels throughout structural openings and internal areas
Technical Specifications
Model: TSM-01-QD-38H
Optical Axis Height: 38 mm / 1.5”
Compatible Devices: InfiRay (iRay) Rico Micro RH25 / PFN640+ V2
Mounting Interface: Picatinny rail
Adjustment: Adjustable QD clamping tension
Material: 7075-T6 aluminum
Finish: MIL-A-8625 Type III Hardcoat Anodized
The Davika TSM-01-QD-38H is built for users who need a flexible thermal mounting solution across day and night sighting configurations. Its 38 mm optical axis, adjustable QD system, precision recoil lug geometry, and integration with the RDM ecosystem make it suitable for mounting an RH25 or PFN640+ V2 as a clip-on thermal or standalone primary thermal optic.
Care
Gear Care (Read This Before You Wreck It)
Always follow the manufacturer’s care instructions first. That’s the rule.
In general:
Soft goods (clothing, slings, pouches, etc.) are usually machine-washable at 30°C and air dry only — unless the label or product page says otherwise. No tumble dryer, no bleach, no “it’ll probably be fine.”
Hard goods (plates, helmets, tools, lights, etc.) should not be thrown in a washer. Wipe them down with water or a mild cleaner and let them dry naturally. No solvents, no high heat, no dishwasher experiments.
If you use cleaning methods that are not recommended by the manufacturer and something fails because of that, it’s not covered by warranty.
Treat your kit like it’s going back out tomorrow.
Care
Gear Care (Read This Before You Wreck It)
Always follow the manufacturer’s care instructions first. That’s the rule.
In general:
Soft goods (clothing, slings, pouches, etc.) are usually machine-washable at 30°C and air dry only — unless the label or product page says otherwise. No tumble dryer, no bleach, no “it’ll probably be fine.”
Hard goods (plates, helmets, tools, lights, etc.) should not be thrown in a washer. Wipe them down with water or a mild cleaner and let them dry naturally. No solvents, no high heat, no dishwasher experiments.
If you use cleaning methods that are not recommended by the manufacturer and something fails because of that, it’s not covered by warranty.
Treat your kit like it’s going back out tomorrow.
Shipping & Returns
We move fast.
For in-stock items, handling time is 0–1 business days and we hand your order to the carrier right away. Shipping speed and price depend on what you pick at checkout (Posti for standard/economy in Finland & EU, FedEx for faster domestic, EU/EEA, and international delivery).
If something is shown as out of stock but still purchasable, that means it’s on back-order / special-order. Estimated dispatch for those items is usually 5–30 days. High-end products like night vision devices and thermal optics are most often “made to order,” meaning we source them individually per customer request.
If your cart has both in-stock gear and made-to-order gear, we may ship what’s ready first so you don’t have to wait.
You’ll get a tracking code as soon as your parcel is handed to Posti or FedEx.
Shipping & Returns
We move fast.
For in-stock items, handling time is 0–1 business days and we hand your order to the carrier right away. Shipping speed and price depend on what you pick at checkout (Posti for standard/economy in Finland & EU, FedEx for faster domestic, EU/EEA, and international delivery).
If something is shown as out of stock but still purchasable, that means it’s on back-order / special-order. Estimated dispatch for those items is usually 5–30 days. High-end products like night vision devices and thermal optics are most often “made to order,” meaning we source them individually per customer request.
If your cart has both in-stock gear and made-to-order gear, we may ship what’s ready first so you don’t have to wait.
You’ll get a tracking code as soon as your parcel is handed to Posti or FedEx.
For full details (carriers, international taxes, delivery issues, etc.), read our complete Shipping Policy.
